Product Description:
FX Mud Paint (Smooth & Coarse) is a slightly textured, flat, Italian style product with varying special effects. FX Mud Paint allows walls to breath. It is an excellent coating for mud brick structures and over cement render surfaces. The product dries lighter after application
Surface Preparation.
All surfaces must be thoroughly cleaned and free of all loose dirt, dust, grease, loose or flaking paint, and loose surface plaster. Efflorescence or mould on masonry or concrete surfaces must be treated. Flatten gloss surfaces by thoroughly sanding and wipe clean with a damp cloth. Then apply FX Sealer Undercoat as required.
Application.
Stir contents thoroughly before and during use with a broad flat stirrer using an upward action, or preferably use a power driven mixing paddle.
Brush/Roller: Use a long nap roller. Thinning is usually required for the first coat. Thin with up to 100 ml to 300 ml of water per litre to ease application. In damp and humid conditions, an addition of an anti mould solution is recommended for exterior use. Two to three coats required with a long nap roller for a more effective finish. Apply the last coat with a brush in a criss-cross motion to achieve a soft, textured lime effect.
When using a brush application for the final coat it is recommended that the product is diluted with 2-4 litres of water to a 15 litre pail.
# Note: Mud Bricks – Apply FX Mud Paint directly onto bricks.
Airspray or conventional spray: This product is suitable for both methods.
Do not apply in direct sunlight.
Approximate Spreading Rate: 4-8 square metres per litre, depending on application and surface roughness.
Tinting: Maximum 150ml per litre. Refer to tinting specifications.
Approximate Film thickness: Wet: 250 microns Dry: 55 microns.
Thinner: Water Method: Brush, roller and spray.
Drying Times: (at 25c) Touch: 2 Hours Recoat: 6 Hours Clean up: Water
Features:
Water based
Attractive finish
Varying effects
|
