FX Australia® Product Information

FX Super Matt Clear

(Interior & Exterior Only)

FX Super Matt Clear is a hardwearing interior and exterior clear matt coating. This product is ideal for sealing wash, r!ust and suede finishes and may also be used on its own to create decorative finishes.

Product Description



Attractive Finish




Ease of application

Easy spreading

Easy clean-up


FX Super Matt Clear is used as a top coat over special finishes such as FX Desert Caravan® and FX Rust Paint. FX Super Matt Clear is tintable and may also be used as a decorative coating on its own to produce interesting effects, such as wood graining.

Surface Preparation

When using FX Super Matt Clear on its own as a decorative coating, ensure all surfaces are thoroughly cleaned and free of dirt, dust, grease, loose or flaking paint, and loose surface plaster. Efflorescence or mould on masonry or concrete surfaces must be treated. Flatten gloss surfaces by thoroughly sanding and wipe clean with a damp cloth. Then apply FX Lemon Tree Creek® Sealer Undercoat as required.


Stir contents thoroughly before and during use with a broad, flat stirrer using an upward action.


Apply with a 75 mm–100 mm brush or a soft, medium or long nap roller.


Note: Apply one coat only over wash, rust or suede effects. A second coat may leave a milky finish.

Conventional Spray:

Suitable for application using all standard spray equipment

Approximate Spreading Rate:

6–10 square metres per litre, depending on application technique and surface roughness.

Approximate Film Thickness per coat:

Wet: 150 Microns; Dry: 25 Microns.


1 coat.


Not required.


Refer to colour chart for tinting specifications.


Brush, roller or conventional spray equipment.

Drying Times (at 25 °C): Touch: (at 25 °C): Touch: 4 Hours; Recoat: N/A

Clean-up: Water. Safety: Dust Mask. Gloss Level: Less than 5% at a 60° viewing angle.

Note: Do not apply paint if the air temperature or substrate temperature is below 10 °C or above 35 °C. The temperature

should not fall below 10 °C during the drying process.

Safety and environmental care


Personal Protection:

Wear eye protection and dust mask when spraying, as splashes may cause eye irritation and inhalation of spray mist may cause respiratory irritation.

Asbestos cement sheeting:

Do not disturb, sand or scrub, and avoid any peripheral dust. If you do not have professional expertise in the handling/removal of asbestos sheeting, use a licensed asbestos removalist.

Refer to product labels, current FX Australia Safety Data Sheets or call FX Australia for detailed information.


Slippery when spilled·

Restrict access to area until clean-up is completed · When cleaning up spills, use personal protection equipment · Stop leak if safe to do so and contain spill with absorbent material such as sand, vermiculite or other inert material · Prevent spill from entering waterways · Collect and dispose of spilled material according to local regulations · Wash away remnants with liberal amounts of cold water.


Store in a cool, dry, well-ventilated place out of direct sunlight · Store away from strong acids and moisture · Keep containers closed at all times and check regularly for spills.


Refer to State/Territory Land Waste Management Authority: most authorities permit disposal at approved land waste sites.

Date of Issue: March 2014

About Us

Australian manufacturer of premium quality speciality paints, architectural & protective coatings and a range of innovative joint & topping compounds.

FX Australia is proudly Australian-owned and Australian-made. We’ve created unique, award-winning paint and plaster finishes for local and international top-drawer brands and design teams and turned many a professional’s concept into reality.


Read More


We'd love to
hear from you.

© 2018 by NF Designs & FX Australia. Proudly created with Wix.com