FX Australia® Product Information
FX Membrane Undercoat
Stir contents thoroughly before and during use with a broad, flat stirrer, using an upward action.
Apply product with a 75mm-100mm brush or a medium nap roller.
Suitable for application using all standard spray equipment. Up to 10% water per litre may be added to aid atomisation.
Approximate Spreading Rate:
6-9 square metres per litre (spray application), depending on application technique and surface roughness.
Approximate Film Thickness per coat:
Wet: 90 Microns; Dry: 25 Microns.
Water, 10% if required.
Brush, roller or airless/conventional spray equipment.
Drying Times (at 25 °C): Touch: (at 25 °C): Touch: 1 Hour; Recoat: 4 Hours.
Clean-up: Water. Safety: Dust Mask. Gloss Level: Less than 5% at a 60° viewing angle.
Note: Do not apply paint if the air temperature or substrate temperature is below 10 °C or above 35 °C. The temperature should not fall below 10 °C during the drying process.
Safety and environmental care
Wear eye protection and dust mask when spraying, as splashes may cause eye irritation and inhalation of spray mist may cause respiratory irritation.
Asbestos cement sheeting:
Do not disturb, sand or scrub, and avoid any peripheral dust. If you do not have professional expertise in the handling/removal of asbestos sheeting, use a licensed asbestos removalist.
Refer to product labels, current FX Australia Safety Data Sheets or call FX Australia for detailed information.
Slippery when spilled·
Restrict access to area until clean-up is completed · When cleaning up spills, use personal protection equipment · Stop leak if safe to do so and contain spill with absorbent material such as sand, vermiculite or other inert material · Prevent spill from entering waterways · Collect and dispose of spilled material according to local regulations · Wash away remnants with liberal amounts of cold water.
Store in a cool, dry, well-ventilated place out of direct sunlight · Store away from strong acids and moisture · Keep containers closed at all times and check regularly for spills.
Refer to State/Territory Land Waste Management Authority: most authorities permit disposal at approved land waste sites.
Date of Issue: March 2014